• SIMULASI SETTING ROUTING STATIC CISCO – PACKET TRACER

    Minggu, 22 Mei 2011 | minanur rohman
    di 23.33 | Label:
    routing dinamik
    SETTING IP
    Router 1
    Router>enable
    Router#configure terminal
    Router(config)#interface fastEthernet 0/0
    Router(config-if)#ip address 172.17.1.1 255.255.255.0

    Router(config-if)#no shutdown
    Router(config-if)#exit
    Router(config)#
    Router(config)#interface fastethernet 1/0
    Router(config-if)#ip address 172.18.1.1 255.255.255.252
    Router(config-if)#no shutdown
    Router(config-if)#exit
    Router(config)#exit
    Router#exit
    Router 2
    Router>en
    Router#conf t
    Router(config)#interface fastEthernet 0/0
    Router(config-if)#ip address 172.18.1.2 255.255.255.252
    Router(config-if)#no shutdown
    Router(config-if)#exit
    Router(config)#
    Router(config)#interface fastEthernet 1/0
    Router(config-if)#ip address 172.18.2.1 255.255.255.252
    Router(config-if)#no shutdown
    Router(config-if)#exit
    Router(config)#
    Router(config)#interface fastEthernet 2/0
    Router(config-if)#ip address 172.17.2.1 255.255.255.0
    Router(config-if)#no shutdown
    Router(config-if)#exit
    Router(config)#exit
    Router#exit
    Router 3
    Router>en
    Router#conf t
    Router(config)#interface fastEthernet 0/0
    Router(config-if)#ip address 172.18.2.2 255.255.255.252
    Router(config-if)#no shutdown
    Router(config-if)#exit
    Router(config)#
    Router(config)#interface fastEthernet 1/0
    Router(config-if)#ip address 172.17.3.1 255.255.255.0
    Router(config-if)#no shutdown
    Router(config-if)#exit
    Router(config)#
    Router#exit
    SETTING ROUTING
    Router 1
    Router>en
    Router#configure terminal
    Router(config)#ip route 172.17.2.0 255.255.255.0 172.18.1.2
    Router(config)#ip route 172.18.2.0 255.255.255.252 172.18.1.2
    Router(config)#ip route 172.17.3.0 255.255.255.0 172.18.1.2
    Router(config)#exit
    Router#exit
    Router 2
    Router>en
    Router#conf terminal
    Router(config)#ip route 172.17.1.0 255.255.255.0 172.18.1.1
    Router(config)#ip route 172.17.3.0 255.255.255.0 172.18.2.2
    Router(config)#exit
    Router#exit
    Router 3
    Router>enable
    Router#conf terminal
    Router3(config)#ip route 172.17.2.1 255.255.255.0 172.18.2.1
    Router3(config)#ip route 172.18.1.0 255.255.255.252 172.18.2.1
    Router3(config)#ip route 172.17.1.0 255.255.255.0 172.18.2.1
    Router3(config)#exit
    Router3#exit


    sumber:http://rantsa.wordpress.com/2010/02/04/simulasi-setting-routing-static-cisco-%E2%80%93-packet-tracer/

0 komentar:

Posting Komentar